TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-23.
Final Drive Assembly. (Sheet 7 of 10)
INSTALLATION
3.
Turn housing over (39, Figure
5-141) with items 37 and 36 as an
assembly installed.
4.
Lower temperature of new cup (38)
and install.
5.
Heat roller bearing (34) in oil
to maximum temperature of 275
degrees F and install on shaft
(35, Figure 5-138).
6.
Install items 35 and 34 as an
assembly in housing (39, Figure
5-137).
7.
Install gear (33).
8.
Install four plates (32), locks
(31) and eight bolts (30).
9.
Install washer (28) and retaining
ring (27) to planet carrier (29,
Figure 5-136).
10. Install three rollers (25 and 24)
in gears (26, Figure 5-135).
Go to Sheet 8
Figure 5-141.
Figure 5-135.
5-109
