TM 5-3805-261-34
REAR AXLE MAINTENANCE.
5-23.
Final Drive Assembly. (Sheet 3 of 10)
REMOVAL
NOTE
The following is a mainte-
nance procedure for the left
side final drive. The
maintenance procedure for the
right side final drive is
identical.
1.
Remove preformed packing (1) and
roller bearing (2, Figure 5-125)
from lower rear, left side of
vehicle. Discard preformed
packing (1).
2.
Remove 16 bolts (3), washers (4),
retainer (5), shim(s) (6) and
washer (7, Figure 5-126). Tie
shim(s) (6) together and tag for
identification.
3.
Support items 8 and 9 as an
assembly (Figure 5-127) and
install two 5/8-11NC eyebolts.
Position forklift under items 8
and 9 as an assembly. Secure
ratchet assembly to forklift and
secure cables to eyebolts.
4.
Using ratchet assembly and
cables, remove items 8 and 9 as
an assembly (Figure 5-128) from
vehicle.
Figure 5-125.
Figure 5-126.
Figure 5-127.
Figure 5-128.
Go to Sheet 4
5-105
