TM 5-3805-261-34
REAR AXLE MAINTENANCE. (cont)
5-24.
Tandem Drive Housing Assembly. (Sheet 2 of 4)
REMOVAL
NOTE
The following is a maintenance
procedure for the right
side tandem drive housing.
The maintenance procedure for
the left side tandem drive
housing is identical.
WARNING
Weight of tandem drive
housing is 1310 lbs. Use
adequate hoist and chains for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
1.
Attach hoist and chains and
ratchet assembly to tandem drive
housing (6) on rear, right side
of vehicle.
WARNING
Make sure that the vehicle
will not roll or shift.
Secure with chock blocks.
Failure to follow this
procedure may cause INJURY.
If you are injured, seek
medical aid immediately.
Do not attempt to manually
lift or support equipment
over 50 pounds. Keep all
personnel clear of
equipment being raised or
lowered. Do not allow
equipment to swing while
suspended by a lifting
device. Exercise extreme
caution when working near a
cable or chain under
tension. Failure to follow
this procedure may cause
INJURY.
Go to Sheet 3
5-114
