FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34

FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34_467

FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34_469

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
421

TM 5-3805-261-34 FRONT AXLE MAINTENANCE. 5-16. Leaning Wheel Mechanism. (Sheet 7 of 8) INSTALLATION 22. Fasten ratchet assembly to arms (44 and 32, Figure 5-98) and vehicle frame. 23. Attach hoist and sling to items 20 thru 17 as an assembly. 24. Position items 20 thru 17 as an assembly on arms (44 and 32). 25. Install wheel lean prevention bolt and nut. Refer to TM 5- 3805-261-10. 26. Using ratchet assembly, aline arms (44 and 32) with bar (20, Figure 5-97). 27. Install pin (16) on left, front of vehicle. Groove in pin (16) must aline with opening in top of arm (44). 28. Install retainer (15), washer (14) and bolt (13). Use shim(s) between pin (16) and retainer (15) to give a 0.030 inch gap between bar (20) and retainer (15). 29. Install lock (12), bolt (11), washer (10) and nut (9). Tighten Figure 5-97. nut (9) to 185 ft-lb torque. Figure 5-98. Go to Sheet 8 5-81

Privacy Statement
Press Release
Contact