FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34

FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34_463

FRONT AXLE MAINTENANCE. (cont) - TM-5-3805-261-34_465

TM-5-3805-261-34 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
417

TM 5-3805-261-34 FRONT AXLE MAINTENANCE. 5-16. Leaning Wheel Mechanism. (Sheet 3 of 8) REMOVAL 10. Remove wheel lean prevention bolt and nut. Refer to TM 5-3805-261- 10. 11. Remove items 17 thru 20 as an assembly from arms (32 and 44). 12. Remove hoist and sling. 13. Using suitable puller, remove four seals (17) and two bearings (18, Figure 5-99). 14. Remove two fittings (19) from bar (20). 15. Remove two bolts (21) and washers (22 and 23, Figure 5-100) from right, front of vehicle. 16. Remove nut (24), bolt (25), washer (26) and lock (27). 17. Remove ratchet assembly. WARNING Weight of arm is approximate- ly 60 lbs. Use adequate hoist and sling for lifting. Failure to follow this procedure may cause INJURY. If you are injured, seek medical aid immediately. 18. Attach hoist and sling to arm (32, Figure 5-101). 19. Remove pin (28). 20. Remove items 29 thru 32 as an assembly. 21. Remove hoist and sling. Figure 5-99. Figure 5-100. Figure 5-101. Go to Sheet 4 5-77

Privacy Statement
Press Release
Contact