TM 5-3805-261-34
FRONT AXLE MAINTENANCE.
5-17.
Leaning Wheel Cylinder. (Sheet 3 of 5)
REMOVAL
6.
Remove bolt (8), washer (9) and
retainer (10, Figure 5-108).
7.
Remove two bolts (11), washers
(12), lock (13) and pin (14).
8.
Remove items 15 thru 17 as an
assembly (Figure 5-109) from
vehicle.
9.
Remove hoist and sling.
10.
Remove and discard four seals
(15) from cylinder (17, Figure
5-110).
Removal of bearings from
cylinder eyes may cause
destruction of bearings.
Remove bearings only if
inspection indicates replace-
ment is necessary.
11.
Inspect two bearings (16).
Replace if cracked, broken,
scored or grooved.
12.
Using suitable driver and press,
remove two bearings (16), if
necessary.
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
CAUTION
Figure 5-108.
Figure 5-110.
Go to Sheet 4
5-85
