TM 5-3805-261-34
FRONT AXLE MAINTENANCE. (cont)
5-16.
Leaning Wheel Mechanism. (Sheet 8 of 8)
INSTALLATION (cont)
30.
Install pin (8, Figure 5-96) on
right, front of vehicle. Groove
in pin (8) must aline with
opening in top of arm (32).
31.
Install retainer (7), washer (6)
and bolt (5). Use shim(s)
between pin (8) and retainer (7)
to give a 0.030 inch gap between
‘
bar (20) and retainer (7).
32.
Install lock (4), bolt (3),
washer (2) and nut (1).
Figure 5-96.
33.
Remove ratchet assembly from arms
(44 and 32, Figure 5-98).
34.
Remove wheel lean prevention bolt
and nut. Refer to TM 5-3805-
261-10.
35.
Remove hoist and sling.
36.
Lubricate lubrication fittings.
Refer to LO 5-3805-261-12.
NOTE
Return 130G Grader to
original equipment condition.
Figure 5-98.
End of Task
5-82
