TM 5-3805-261-34
FRONT AXLE MAINTENANCE. (cont)
5-16.
Leaning Wheel Mechanism. (Sheet 2 of 8)
REMOVAL
1.
Install wheel lean prevention
bolt and nut. Refer to TM 5-
3805-261-10.
2.
Fasten ratchet assembly to arms
(32 and 44) on front of vehicle.
Ratchet assembly is used to
reduce the load on pins (8 and
17, Figure 5-95) and aid in their
removal.
3.
Remove nut (1), washer (2), bolt
(3) and lock (4, Figure 5-96)
from right, front of vehicle.
4.
Remove bolt (5), washer (6) and
retainer (7) from arm (32).
5.
Remove pin (8).
6.
Remove nut (9), washer (10), bolt
(11) and lock (12, Figure 5-97)
from left, front of vehicle.
7.
Remove bolt (13), washer (14) and
retainer (15) from bar (20).
8.
Remove pin (16) from arm (44).
WARNING
Weight of wheel lean bar is
approximately 55 lbs. Use
adequate hoist and sling for
lifting. Failure to follow
this procedure may cause
INJURY. If you are injured,
seek medical aid immediately.
9.
Attach hoist and sling to items
17 thru 20 as an assembly (Figure
5-98) on front of vehicle.
Figure 5-95.
Figure 5-96.
Figure 5-97.
Figure 5-98.
Go to Sheet 3
5-76
