TM 5-3805-261-34
FRONT AXLE MAINTENANCE. (cont)
5-14.
Steering Arms and Tie Rod. (Sheet 5 of 10)
REMOVAL (cont)
CAUTION
Do not damage socket
assembly. Keep nut flush
with end of socket assembly.
16.
Tap nut (14) with hammer to
loosen socket assembly (15) from
its taper and remove nut (14).
17.
Move socket assembly (15) away
from housing (37).
18.
Remove washer (16).
19.
Remove bolt (17), washer (18) and
retainer (19, Figure 5-76).
20.
Using suitable puller, remove
ring (20) from retainer (19).
21.
Remove bolt (21), washer (22) and
retainer (23).
22.
Using suitable puller, remove
ring (24) from retainer (23).
23.
Remove two bolts (25) and washers
(26, Figure 5-77).
WARNING
Weight of housing is
approximately 415 pounds.
Use adequate hoist and sling
for lifting. Failure to
follow this procedure may
cause INJURY. If you are
injured, seek medical
aid
immediately.
24.
Attach hoist and sling to housing
(37).
25.
Using assembled puller adapter,
washer, nut, screw, puller
assembly, pump group and spacer,
remove two pins (27).
Go to Sheet 6
5-62
Figure 5-75.
Figure 5-76.
Figure 5-77.
