TM 5-3805-261-34
FRONT AXLE MAINTENANCE.
5-14.
Steering Arms and Tie Rod. (Sheet 4 of 10)
REMOVAL
7.
Stop engine.
8.
Disconnect battery negative
grounds from batteries. Refer to
TM 5-3805-261-20.
NOTE
Steps 9 thru 32 are for
removal of the right steering
arm. Procedure for removal
of the left steering arm is
identical.
9.
Remove and discard cotter pin
(10) from right, front socket
(41, Figure 5-75).
10.
Loosen nut (11) until even with
end of threads on socket assembly
(41).
CAUTION
Do not damage socket
assembly. Keep nut flush
with end of socket assembly.
11. Tap nut (11) with hammer to
loosen socket assembly (41) from
its taper and remove nut (11).
12. Move socket assembly (41) away
from housing (37).
13 Remove washer (12).
14. Remove and discard cotter pin
(13).
15. Loosen nut (14) until even with
end of threads on steering
cylinder socket assembly (15).
Go to Sheet 5
5-61
Figure 5-75.
