TM 5-3805-261-34
FRONT AXLE MAINTENANCE. (cont)
5-13.
Front Axle Assembly. (Sheet 3 of 4)
REMOVAL (cont)
6.
Using hoist and sling, remove
items 11 thru 13 as an assembly
(Figure 5-70).
7.
Remove hoist and sling.
8.
Using suitable driver, remove two
seals (11) and bearings (12) from
axle (13, Figure 5-71).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
INSTALLATION
NOTE
During installation, special
tools must be used to prevent
damage to bearings.
1.
Using pulling adapter, puller
assembly, washer, screw and nut,
install two bearings (12) 0.282
inch from each surface of axle
(13, Figure 5-71).
2.
Install two seals (11) with lips
toward outside surface and even
with outside surface of axle
(13).
3.
Attach hoist and sling to items
13 thru 11 as an assembly (Figure
5-70).
4.
Position items 13 thru 11 as an
assembly on vehicle.
Go to Sheet 4
5-56
Figure 5-70.
Figure 5-71.
