TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE. (cont)
4-12.
Starting Motor (Bosch). (Sheet 4 of 11)
DISASSEMBLY (cont)
22.
Remove six screws (26) and items
27 thru 30 as an assembly from
housing (39, Figure 4-74).
23.
Using spring loaded collet and
extractor, remove and discard
bearing (27, Figure 4-75).
24.
Remove and discard spacer (28).
25.
Remove and discard preformed
packing (29) from housing (30).
26.
Remove washer (31, Figure 4-76).
27.
Remove ring (32), pin (33) and
two preformed packings (34) from
housing (39). Discard two
preformed packings (34).
28.
Remove drive (35), lever (36) and
washer (37) from armature (43)
shaft.
29.
Remove six screws (38) and items
39 thru 42 as an assembly from
housing (53, Figure 4-77).
30.
Remove and discard preformed
packing (39) and seal (40) from
housing (42, Figure 4-78).
31.
Using suitable driver and press,
remove and discard bearing (41)
from housing (42).
Go to Sheet 5
4-68
Figure 4-74.
Figure 4-75.
Figure 4-76.
Figure 4-78.
Figure 4-77.