TM 5-3805-261-34
STARTING SYSTEM MAINTENANCE.
4-11.
Starting Motor (Prestolite). (Sheet 8 of 9)
ASSEMBLY
19.
Using arbor press, install
bearing (24) into head (26,
Figure 4-63).
20.
Aline matchmarks on items 36 thru
27 as an assembly with matchmarks
on head (26).
21.
Install three bolts (25) and
tighten to 8 ft-lb torque.
22.
Install new preformed packings
(23 and 22).
23.
Install bolt (21), pin (20) and
two plugs (19).
24.
Install items 36 thru 19 as an
assembly on armature (37, Figure
4-62).
25.
Install seven lockwashers (18)
and screws (17).
26.
Using an arbor press, install
bearing (16) in end assembly
(14).
27.
Install new gasket (15) and end
assembly (14).
28.
Install four lockwashers (13) and
screws (12).
Go to Sheet 9
4-63
Figure 4-63.
Figure 4-62.
