TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-28.
Governor. (Sheet 8 of 17)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
TESTING
1.
Using spring tester, test and
preload spring (6) to 4 lbs.
Compress an additional 0.9 inch.
Total pressure on spring must be
13.5 lbs. Spring must return to
a free length of approximately
2.34 inches after testing.
2.
Using spring tester, test and
preload spring (73) to 0.30 lb.
Compress an additional .070 inch.
Load must be 1.0 lb.
3.
Using spring tester, test spring
(81). Spring (81) must be at a
length of 1.03 inch when
compressed .043 lbs. and return
to a free length of 1.26 inch
after test.
4.
Using a spring tester, test
spring (94). Spring (94) must be
at a length of 1.03 inch when
compressed 3 lbs. and return to a
free length of 2.28 inches after
test.
Go to Sheet 9
3-151