TM 5-3805-261-34
FUEL SYSTEM MAINTENANCE.
3-28.
Governor. (Sheet 6 of 17)
DISASSEMBLY
1.
Remove three bolts (91, Figure
3-124).
2.
Remove ring (92), seat (93),
spring (94), sleeve (95) and
items 97 thru 103 as an assembly
(Figure 3-125).
3.
Remove ring (96) from items 97
thru 103. Rotate items 97 thru
103 to disengage.
4.
Remove valve (97), piston (98)
and sleeve (99, Figure 3-126).
5.
Remove preformed packing (100)
from sleeve (99). Discard
preformed packing (100).
6.
Remove items 101 thru 103 as an
assembly.
7.
Using hammer and punch, drive pin
(101) from cylinder (103). Remove
lever (102, Figure 3-127).
8.
Using suitable spring compressor,
compress spring (107, Figure
3-128).
9.
Remove ring (104).
10.
Release spring (107) and remove
spring compressor.
11.
Remove bearing (105).
12.
Remove two sleeves (106) and
spring (107).
13.
Remove ring (104) and items 108
thru 113 as an assembly.
Go to Sheet 7
Figure 3-128.
Figure 3-127.
Figure 3-126.
Figure 3-125.
Figure 3-124.
3-149