TM 5-3805-261-34
ENGINE MAINTENANCE. (cont)
3-5.
Engine Mounting and Trunnion. (Sheet 3 of 4)
DISASSEMBLY
CAUTION
Do not disassemble items 22 thru
24 unless inspection shows ring to
be worn or defective.
Remove trunnion (22) and ring (23) from
support (24, Figure 3-14).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter
2.
ASSEMBLY
1.
Install ring (23) in support (24,
Figure 3-14). Ring (23) must be
recessed 0.040 to 0.080 inch from
back edge of support (24).
2.
Install trunnion (22). Lubricate
inner diameter of ring (23) with 3
percent soap solution.
INSTALLATION
1.
Install new performed packing
(21), items 22 thru 24 as an as-
sembly and three bolts (20, Figure
3-13).
2.
Install support (19), six washers
(18) and bolts (17).
Go to Sheet 4
Figure 3-14.
Figure 3-13.
3-32
