Figure 3-11.
TM 5-3805-261-34
ENGINE MAINTENANCE.
3-5.
Engine Mounting and Trunnion. (Sheet 4 of 4)
INSTALLATION
3.
Install dowel (16) to support (14,
Figure 3-12).
4.
Install support(14) and two bolts
(15) to bottom, rear of engine.
5.
Install bolt (12) and nut (13) to
support (14). Bolt (12) must be
installed to extend 0.118 inch
below lower edge of support (14).
6.
Install dowel (11) to support (9).
7.
Install support (9) and two bolts
(10) to bottom, rear of engine.
8.
Install bolt (7) and nut (8) to
support (9). Bolt (7) must be in-
stalled to extend 0.118 inch below
lower edge of support (9).
9.
Install plate (6), two washers (5)
and bolts (4, Figure 3-11) to top,
rear of engine.
10.
Install two plates (3), washers
(2) and bolts (1) to top, front of
engine.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
Figure 3-12.
3-33
