TM 5-3805-261-34
FRAME MAINTENANCE. (cont)
16-2.
Frame Separation and Connection. (Sheet 10 of 12)
INSTALLATION (cont)
14.
Measure distance between plate
(48) and rear frame (53, Figure
16-21) with a feeler gage.
Measure distance at each of four
bolt (44) locations.
15.
Remove four bolts (44), lock-
washers (45) and plate (48,
Figure 16-22).
16.
Install a thickness of shim(s)
(49) same as minimum distance
measured in step 14 minus 0.010
inch, plate (48), six lockwashers
(47), bolts (46), four lock-
washers (45) and bolts (44,
Figure 16-12).
17.
Disconnect air supply line from
elbow on parking brake actuator
and connect hose (52, Figure
16-15).
18.
Remove jack stands and forklift
from vehicle.
19.
Install pin (37) and new cotter
pin (36, Figure 16-8) on
articulation indicator linkage.
Go to Sheet 11
16-12
Figure 16-
Figure 16-8.
Figure 16-
Figure 16-22.
Figure 16-21.
