TM 5-3805-261-34
FRAME MAINTENANCE.
16-2. Frame Separation and Connection. (Sheet 5 of 12)
REMOVAL
10. Remove bolt (29), washer (30) and
clip (31, Figure 16-7).
11. Remove clamp (32) and position
heater hose (33) to rear of
vehicle.
12. Remove clamp (34) and position
heater hose (35) to rear of
vehicle.
13. Remove cotter pin (36) and pin
(37, Figure 16-8) from
articulation indicator linkage.
Discard cotter pin (36).
14. Position forklift at rear frame
of vehicle.
15. Position two jack stands under
operator’s platform on each side
of vehicle.
16. Position all wire, cable and
harness assemblies to front of
vehicle.
17. Position all hose assemblies to
rear of vehicle.
18. Position wood blocks under front
wheels so that wheels cannot
move.
19. Remove four bolts (38) and
lockwashers (39) from four
corners of plate (42, Figure
16-9).
Figure 16-7.
Figure 16-8.
Figure 16-9.
Go to Sheet 6
16-7
