TM 5-3805-261-34
FRAME MAINTENANCE. (cont)
16-2. Frame Separation and Connection. (Sheet 4 of 12)
REMOVAL (cont)
5.
Remove two bolts (21) and washers
22, Figure 16-5) from left, front
of transmission in engine
compartment.
6.
Loosen three nuts (23) and slide
back on control cable assemblies
(26, 27 and 28).
7.
Slide back retainer (24) and
three couplings (25) on cable
assemblies (26, 27 and 28, Figure
16-6).
NOTE
All wire, cable and harness
assemblies must be tagged
before disconnecting to aid
in installation.
8.
Separate three cable assemblies
(26, 27 and 28) from transmission
control valves.
9.
Pull cable assemblies (26, 27 and
28) forward from engine compart-
ment and position cable assembly
(26) alongside left side of cab
and cable assemblies (27 and 28)
alongside right side of cab.
Figure 16-5.
Figure 16-6.
Go to Sheet 5
16-6
