TM 5-3805-261-34
ENGINE MAINTENANCE.
3-4.
Engine. (Sheet 13 of 13)
INSTALLATION
38.
Install cable assemblies (13 and
12), lockwasher (11), cable
assembly (10), lockwasher (9) and
nut (8, Figure 3-4) to starting
motor. Tighten nut (8) to 22
ft-lb torque.
39.
Install cable assemblies (7 and
6), wire assembly (5), lockwasher
(4) and nut (3) to solenoid
"battery" terminal. Tighten nut
(3) to 22 ft-lb torque.
40.
Install wire assembly (2) at
terminal and nut (1) on "S"
terminal of solenoid (9).
41.
Turn fuel shutoff valve counterclock-
wise on right front of fuel tank to
urn fuel on (Figure 3-3).
42.
Refill engine oil crankcase to
proper level. Refer to LO 5-
3805-261-12.
43.
Refill radiator to proper level.
Refer to paragraph 6-48 in TM 5
3805-261-20.
44.
Bleed air out of fuel lines.
Refer to paragraph 6-15 in TM
5-3805-261-20.
Refer to paragraph 6-15 in TM 5-
3805-261-20.
NOTE
Return 130G Grader to
original equipment condition.
End of Task
Figure 3-3.
3-29
