TM 5-3805-261-34
ENGINE MAINTENANCE.
3-5.
Engine Mounting and Trunnion. (Sheet 2 of 4)
REMOVAL
1.
Remove two bolts (1), washers (2)
and plates (3, Figure 3-11) from
top, front of engine.
2.
Remove two bolts (4), washers (5)
and plate (6) from top, rear of en-
gine.
3.
Remove bolt (7) and nut (8) from
support (9, Figure 3-12).
4.
Remove two bolts (10) and support
(9) from bottom, rear of engine.
5.
Remove dowel (11) from support (9).
6.
Remove bolt (12) and nut (13) from
support (14).
7.
Remove two bolts (15) and support
(14) from bottom, rear of engine.
8.
Remove dowel (16) from support
(14).
9.
Remove six bolts (17), washers
(18) and support (19, Figure 3-13)
from bottom, front of engine.
CAUTION
Use care when removing and install-
ing the trunnion to prevent damage
to the crankshaft front seal.
10.
Remove three bolts (20), trunnion
items 22 thru 24 as an assembly
and preformed packing (21). Dis-
card preformed packing (21).
Go to Sheet 3
3-31
Figure 3-11.
Figure 3-12.
Figure 3-13.
