TM 5-3805-261-34
ENGINE MAINTENANCE.
3-4.
Engine. (Sheet 9 of 13)
INSTALLATION
6.
Inspect shim(s) (64, Figure 3-9)
for proper alignment.
7.
Remove hoist and sling.
8.
Install four lockwashers (63)
and bolts (62) loosely in
trunnion and frame on left and
rights sides of lower, front of
engine.
9.
Install two of 12 lockwashers
(35) and bolt
(34, Figure 3-10)
in two top mounting holes of
engine-to-transmission adapter,
securing adapter to engine.
10.
Align engine.
11.
After proper alignment has been
made, tighten four bolts (62) to
150 ft-lb torque.
12.
Install four washers (61) and
screws (60).
13.
Position two new preformed
packing (59) and hose assemblies
(58) on transmission oil cooler.
14.
Install four washers (57) and
bolts (56).
Go to Sheet 10
3-25
Figure 3-10.
