TM 5-3805-261-23-2
WHEEL SPINDLE, BEARINGS, AND SEALS REPLACEMENT - CONTINUED
0302 00
REMOVAL
NOTE
This procedure covers the replacement of the right wheel spindle, bearings, and seals. Follow these instruc-
tions for the left wheel spindle, bearings, and seals.
1.
Remove two bolts (3) and cover (4).
2.
Remove and discard preformed packing (5).
NOTE
Tie shim(s) together and tag for identification.
3.
Remove three bolts (2), retainer (6), and shim(s) (7).
4.
Loosen bolt (8) and nut (1).
5.
Position forks of jack group on threads of bolt (8) at center of wheel lean arm. Position other end of jack group against
wheel spindle assembly (9).
1
3
2
8
4
9
5
6
7
397-2333
6.
Remove spindle assembly (9) from housing (10) by
tightening nut on jack group.
7.
Tighten bolt (8) and nut (1).
10
1
8
397-4180
9
0302 00-2