TM 5-3805-261-23-2
WHEEL SPINDLE, BEARINGS, AND SEALS REPLACEMENT - CONTINUED
0302 00
INSTALLATION - CONTINUED
16.
Install seal inserter on seal (13) and ring (14).
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic material.
However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-ventilated
areas. Keep away from open flames and other sources of ignition. Failure to follow this warning may cause
injury or death to personnel.
17.
Use seal inserter to lower seal (13) and ring (14) into
SEAL
container of solvent cleaning compound until ring is
INSERTER
completely wet.
13
14
397-4188
18.
Position seal (13) and ring (14) on spindle (9). With
SEAL INSERTER
ring still wet, use seal inserter to position seal and ring
13
squarely against spindle.
19.
Install seal (13) and ring (14). With sudden and even
9
pressure on the seal inserter, push to seat ring under
RETAINING
retaining lip of spindle (9).
LIP
20.
Adjust seal (13) and ring (14), if necessary, using seal
inserter.
397-4185
14
0302 00-6
