TM 5-3805-261-23-2
STEERING ARMS AND TIE ROD MAINTENANCE - CONTINUED
0301 00
INSTALLATION - CONTINUED
25.
Operate wheel lean control lever to position rod
1
assembly (7) in line with pin (4) on right front of
9
machine.
8
7
6
26.
Stop engine.
5
27.
Turn battery disconnect switch to OFF position (TM
28.
Position pin (4) through eye of rod assembly (7) on
front-right of machine.
29.
Install retainer (8), washer (9), and bolt (1).
30.
Install lock (6), bolt (5), washer (3), and nut (2).
4
Tighten nut to 185 lb-ft (251 Nm).
397-2332
3
31.
Install wheel spindles (WP 0302 00).
2
32.
Install front wheels (WP 0166 00).
ADJUSTMENT
1.
Install wheel lean prevention bolt and nut (WP 0303
00).
2.
Raise front axle off ground with jack and support with
two jack stands.
JACK STANDS
397-4176
0301 00-9