TM 5-3805-261-23-2
WHEEL SPINDLE, BEARINGS, AND SEALS REPLACEMENT - CONTINUED
0302 00
INSTALLATION - CONTINUED
21.
Inspect ring (14) for twists or bulges. Ensuring is seated properly on bottom of seal ramp and against retaining lip. Incor-
rect installation will result in seal failure. If incorrect installation is obvious, repeat steps 18 through 20.
NOTE
If any dirt particles remain on seal face, seal will leak.
22.
Clean seal (13) mating surface with a lint free cloth.
13
23.
Lubricate mating surface of seal (13) with gear lubri-
13
cant.
RAMP
14
14
RETAINING LIP
397-4183
24.
Loosen bolt (8) and nut (1).
25.
Install spindle assembly (11) in housing (10).
26.
Tighten bolt (8) and nut (1).
10
1
8
397-4180
11
0302 00-7