TM 5-3805-261-23-2
STEERING ARMS AND TIE ROD MAINTENANCE - CONTINUED
0301 00
INSTALLATION - CONTINUED
12.
Install ring (23).
19
20
13.
Use driver to install retainer (24), washer (25), and
21
bolt (26).
14.
Install ring (22).
22
15.
Install retainer (21), washer (20), and bolt (19).
23
26
24
25
397-4171
16.
Install washer (14) on socket assembly (13).
12
10
11
17.
Install socket assembly (13) in housing (15).
17
16
18.
Install nut (17) and tighten to 90 lb-ft (122 Nm). Slot
18
in nut must align with hole in socket assembly (13).
19.
Install new cotter pin (16).
15
20.
Install washer (18).
14
21.
Position socket assembly (10) on housing (15).
22.
Install nut (11) and tighten to 90 lb-ft (122 Nm).
23.
Install new cotter pin (12).
13
397-4170
24.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
0301 00-8