TM 5-3805-261-23-1
SECONDARY FUEL FILTER AND MOUNTING MAINTENANCE
(MODELS 130GS AND 130GNS) - CONTINUED
0048 00
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Install mounting base (10) with two bolts (6 and 8) and new lockwashers (7 and 9).
6,7
8,9
10
397-2462
2.
Install element (5) and retaining clamp (1).
3.
Install fittings and connect hoses in accordance with WP 0042 00. Close lower pet cock (3).
4.
Close upper petcock (2) and remove container.
5.
Turn battery disconnect switch to ON position and start engine (TM 5-3805-261-10).
6.
Check for leaks. Stop engine.
NOTE
If engine was running roughly, perform the next step. If not, proceed to step 14.
7.
Bleed air from fuel injection pump lines in top of fuel injection pump (WP 0035 00).
8.
Close right side engine doors (TM 5-3805-261-10).
END OF WORK PACKAGE
0048 00-3
