TM 5-3805-261-23-1
SECONDARY FUEL FILTER AND MOUNTING MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0047 00
REMOVAL - CONTINUED
9
5.
Remove two bolts (7), washers (8), base (6), and gas-
ket (9). Discard gasket.
6
8
7
397-149
DISASSEMBLY
1.
Remove plug (10) and preformed packing (11) from base (6). Discard preformed packing.
2.
Remove plug (12).
NOTE
Remove stud only if inspection indicates replacement is necessary.
3.
If necessary, remove stud (13) from base (6).
10
6
11
12
13
397-152
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
If removed, coat threads of stud (13) with sealing compound and install in base (6). Tighten to 50 lb-ft (68 Nm).
2.
Install plug (12).
3.
Install new preformed packing (11) and plug (10) to base (6).
0047 00-3