TM 5-3805-261-23-1
FUEL INJECTION LINES MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation, Bleeding
INITIAL SETUP
Maintenance Level
References
Unit
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's (Item 89, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
Shop equipment, common no. 2 (Item 76, WP 0348
10)
Parking/emergency brake applied (TM 5-3805-261-
Wrench, torque (Item 95, WP 0348 00)
10)
Driver bit, T-15 TORX (Item 21, WP 0348 00)
Implements lowered to ground (TM 5-3805-261-
10)
Materials/Parts
Cap set, protective (Item 7, WP 0349 00)
Engine off (TM 5-3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Packing with retainer (4)
Right side engine panel removed (WP 0182 00)
WARNING
DO NOT smoke or permit any open flame in area of machine while you are servicing fuel system. Be
sure hose nozzle is grounded against filler tube during refueling to prevent static electricity. Failure to
follow this warning may result in death or injury to personnel or damage to equipment.
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing death or injury to personnel or damage to equipment.
Operating personnel must wear fuel-resistant gloves when handling fuel. If exposed to fuel, promptly
wash exposed skin and change fuel-soaked clothing.
Exercise care when working with hot components. Allow to cool before handling. Failure to follow this
warning may result in injury to personnel.
