TM 5-3805-261-23-1
SECONDARY FUEL FILTER AND MOUNTING MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE) - CONTINUED
0047 00
INSTALLATION
9
1.
Install new gasket (9), base (6), two washers (8), and
bolts (7).
6
8
7
397-149
2.
Lubricate seal of new filter element (5) with clean fuel and install, turning right until contact between seal of element
and base (6) is made. Tighten an additional one turn.
3.
Install new preformed packing (3) and elbow (2).
4.
Install tube assembly (1) to elbow (2).
5.
Install fuel pressure switch (WP 0115 00).
Turn valve (4), in front-lower-right of fuel tank, left to open.
1
2
3
6
5
4
397-148
0047 00-4
