TM 5-3805-261-23-1
FUEL TANK HOSES, LINES, AND FITTINGS REPLACEMENT (MODELS 130GS AND 130GNS)
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Tools and Special Tools
Equipment Conditions
Tool kit, general mechanic's (Item 89, WP 0348 00)
Machine parked on level ground (TM 5-3805-261-
Shop equipment, field maintenance (Item 74, WP
10)
Parking/emergency brake applied (TM 5-3805-261-
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Cap set, protective (Item 7, WP 0349 00)
10)
Rag, wiping (Item 35, WP 0349 00)
Engine off (TM 5-3805-261-10)
Tag, marker (Item 44, WP 0349 00)
Fuel tank drained (WP 0044 00)
Right side engine panel removed (WP 0182 00)
Packing, preformed (9)
REMOVAL
WARNING
DO NOT smoke or permit any open flame in area of machine while you are servicing fuel system. Be
sure hose nozzle is grounded against filler tube during refueling to prevent static electricity. Failure to
follow this warning may cause injury to personnel or damage to equipment.
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames,
or sparks. Fuel may ignite, causing injury or death to personnel and damage to equipment.
Operating personnel must wear fuel-resistant gloves when handling fuels. If exposed to fuel, promptly
wash exposed skin and change fuel-soaked clothing. Failure to follow this warning may cause injury to
personnel.
Wear safety goggles to protect eyes when disconnecting fuel lines. If fuel makes contact with eyes or
skin, flush with large amounts of cold water and seek medical aid immediately.
CAUTION
Cap all hose and tube ends and plug all open fuel ports to prevent contamination.
NOTE
Tag hose and tube assemblies before disconnecting to aid in installation.
