TM 5-3805-261-23-1
ETHER STARTING AID ASSEMBLY REPLACEMENT - CONTINUED
0050 00
REMOVAL
1.
Remove two bolts (1), washers (2), and clamp (3) in right-rear side of fuel tank (4).
CAUTION
Cap all tube and hose ends and plug all open ports to prevent contamination.
NOTE
Tag tubes and hose before disconnecting to aid in installation.
2.
Disconnect harness assembly (9) from valve (11) and bolt.
3.
Remove bolt (7), washer (6), and clamp (5) from tube (8).
4.
Loosen connector (10) and disconnect tube (8) from valve (11).
NOTE
Do not remove connector from tube unless inspection shows need for replacement.
5.
Remove connector (10) from tube (8).
6.
Remove two bolts (12), washers (13), and valve (11).
2
3
4
1
13
12
11
10
5
9
6
8
397-156
7
0050 00-2
