TM 5-3805-261-23-1
ETHER STARTING AID CYLINDER REPLACEMENT - CONTINUED
0049 00
REMOVAL
1.
Loosen wing nut (3) and clamp (2) behind right fan guard.
2.
Remove engine starting aid cartridge (1) by turning to the left. Dispose in accordance with local regulatory guidance.
1
2
3
397-155
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
INSTALLATION
NOTE
Install protective cap on valve if cartridge is not to be replaced.
1.
Install new engine starting aid cartridge (1) by turning to the right.
2.
Tighten clamp (2) and wing nut (3).
3.
Close right side screen door (WP 0055 00).
END OF WORK PACKAGE
0049 00-2
