TM 5-3805-261-23-1
SECONDARY FUEL FILTER AND MOUNTING MAINTENANCE
(MODELS 130G, 130GSCE, AND 130GNSCE)
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Tools and Special Tools
Tool kit, general mechanic's (Item 89, WP 0348 00)
Equipment Conditions
Shop equipment, common no. 1 (Item 75, WP 0348
Machine parked on level ground (TM 5-3805-261-
10)
Wrench, torque (Item 97, WP 0348 00)
Parking/emergency brake applied (TM 5-3805-261-
10)
Materials/Parts
Implements lowered to ground (TM 5-3805-261-
Cap set, protective (Item 7, WP 0349 00)
10)
Fuel (Item 13, 14, or 15, WP 0349 00)
Engine off (TM 5-3805-261-10)
Rag, wiping (Item 35, WP 0349 00)
Battery disconnect switch in OFF position (TM 5-
3805-261-10)
Sealing compound (Item 39, WP 0349 00)
Fuel pressure switch removed (not necessary if just
Filter element
replacing filter element) (WP 0115 00)
Gasket
Right side engine doors opened (TM 5-3805-261-
Packing, preformed (2)
10)
WARNING
DO NOT smoke or permit any open flame in area of machine while you are servicing fuel system. Be
sure hose nozzle is grounded against filler tube during refueling to prevent static electricity. Failure to
follow this warning may result in death or injury to personnel or damage to equipment.
DO NOT perform fuel system checks, inspections, or maintenance while smoking or near fire, flames,
or sparks. Fuel may ignite, causing injury or death to personnel or damage to equipment.
Operating personnel must wear fuel-resistant gloves when handling fuel. If exposed to fuel, promptly
wash exposed skin and change fuel-soaked clothing.
