TM 5-3805-261-23-1
PRIMARY FUEL FILTER/PRIMING PUMP AND MOUNTING MAINTENANCE
(MODELS 130GS AND 130GNS) - CONTINUED
0046 00
DISASSEMBLY
17
1.
Remove two bolts (17) and washers (24).
24
2.
Remove priming pump (18) and gasket (23) from base
(22). Discard gasket.
3.
Remove seat (19), disk (20), and spring (21) from base
(22).
23
18
19
20
21
397-2113
22
CLEANING AND INSPECTION
Clean and inspect all parts in accordance with WP 0020 00.
ASSEMBLY
1.
Install spring (21), disk (20), and seat (19) in base (22).
2.
Install new gasket (23) and priming pump (18) on base (22).
3.
Install two washers (24) and bolts (17).
INSTALLATION
8
15,16
1.
Install support (6), two bolts (1 and 4), and washers (2
and 5).
2.
Install elbow (16).
9
3.
Install primary fuel filter/priming pump (8), two wash-
ers (12 and 14), and bolts (11 and 13).
4.
Connect tube assembly (15).
10
5.
Install elbow (10) and connect hose assembly (9).
397-2386
13,14
11,12
0046 00-4
