TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
10. No Alternator Output -
Continued.
397-2436
d. Place battery disconnect switch to
ON position and observe
multimeter reading.
e. If battery voltage is indicated, place
battery disconnect switch in OFF
position.
f. Check continuity between
1. Repair or replace alternator ground
alternator and ground.
2. If continuity is present, replace
alternator (WP 0066 00).
NOTE
11. Alternator Charge Is Too
High.
If STE/ICE-R is available, perform Test #90 (TM 9-4910-571-12&P).
Test charging voltage. Go to Malfunction
If out of range, replace alternator (WP
10.
1.
Check main circuit breaker (60A).
1. Reset circuit breaker.
12. All Driving, Tail, and Panel
Lights Fail to Operate.
2. Replace if defective. If the problem
still exists, go to Test 2.
