TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
d. Crank engine and observe meter.
If voltage exceeds 0.4 volt, clean and
6.
Solenoid and Starting Motor
tighten cable connections at batteries,
Operate; Engine Cranks
starting motor, and chassis ground points.
Slowly - Continued.
If the problem still exists, go to Test 8.
GS
MTR
(+)
(-)
BAT
397-2434
8.
Test battery voltage after cranking
load is applied.
a. Set multimeter to appropriate
voltage range.
0008 00-18
