TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. Connect meter lead directly across
6.
Solenoid and Starting Motor
battery terminals as shown below.
Operate; Engine Cranks
Slowly - Continued.
c. Push governor control lever
1. If voltage is not 20 volts or more, go to
Malfunction 2.
forward past detent and crank
engine for approximately 30
2. If voltage is satisfactory, replace
seconds. Observe meter reading
starting motor (WP 0067 00).
after cranking has stopped.
397-2435
0008 00-19
