TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. Crank engine and observe meter.
1. If voltage reading is 0.4 volt, replace
6.
Operate; Engine Cranks
malfunction still exists, go to Tests 6,
Slowly - Continued.
7, and 8.
G
MTR
S
(+)
(-)
BAT
397-2432
6.
Test negative cable voltage drop
from batteries to starting motor.
a. Place battery disconnect switch in
OFF position.
b. Connect meter positive lead to
negative terminal on starting motor
and meter negative lead to chassis
ground.
c. Place battery disconnect switch to
ON position.
0008 00-16