TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. Connect meter negative lead to
1. If continuity is indicated, replace
5.
Starting Motor Is Inoperative
chassis ground and observe
starting motor ((WP 0067 00).
- Continued.
reading.
2. If no continuity is indicated, repair the
ground circuit (WP 0021 00). If the
problem still exists, go to Test 7.
S
G
MTR
(+)
(-)
BAT
397-2425
7.
Test starter relay.
a. Place battery disconnect switch in
OFF position.
b. Set multimeter to appropriate
voltage range.
c. Connect meter positive lead to
smaller gauge wire with no
insulation and negative lead to
chassis ground.
d. Place battery disconnect switch to
ON position.
0008 00-8
