TM 5-3805-261-23-1
ELECTRICAL SYSTEM TROUBLESHOOTING PROCEDURES - CONTINUED
0008 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. Momentarily turn start switch fully
1. If battery voltage is indicated, replace
5.
Starting Motor Is Inoperative
to the right and observe meter
starting motor (WP 0067 00).
- Continued.
reading.
G
S
MTR
(+)
(-)
BAT
397-2423
5.
Check starter relay and solenoid.
a. Place battery disconnect switch in
OFF position.
b. Set multimeter to appropriate
voltage range.
c. Connect meter positive lead to
terminal S on solenoid.
d. Connect meter negative lead to
chassis ground.
e. Turn battery disconnect switch to
ON position.
0008 00-6
