TM 5-3805-261-20
BODY, CAB, HOOD AND HULL MAINTENANCE.
13-11.
Cab Storage Compartment. (Sheet 4 of 4)
INSTALLATION
3
Install bracket (26), two washers (25) and
bolts (24) on plate (27, Figure 13-46).
4.
Install items 27 thru 24 as an assembly, two
washers (23), bolts (22), washers (21) and
nuts (20, Figure 13-45).
5.
Install plate (19), two washers (18), bolts
(17), washers (16) and nuts (15).
6.
Install plate (14), two washers (13), bolts
(12), washers (11) and nuts (10, Figure 13-
44).
7.
Install plate (9), two washers (8), bolts (7),
washers (6) and nuts (5).
8.
Position clip (35) on plate (9, Figure 13-43).
9.
Install bolt (4), washer (3) and nuts (2) on
plate (9).
10.
Position storage compartment items 34 thru
28 as an assembly.
11.
Install 14 screws (1).
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 13-45.
Go to Sheet 3
Figure 13-44.
Figure 13-43.
End of Task
13-47
