REMOVAL (cont) - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
803

TM 5-3805-261-20 BODY, CAB, HOOD AND BULL MAINTENANCE. (cont) 13-11. Cab Storage Compartment. (Sheet 3 of 4) REMOVAL (cont) 9. Remove two bolts (24), washers (25) and bracket (26) from plate (27, Figure 13-46). NOTE Remove rivets, hinges or doors only if inspection indicates replacement is necessary. 10. Remove three knobs (28), six rivets (29) and three latches (30, Figure 13-47). Drill out six rivets (29), if necessary. 11. Remove 24 rivets (31), six hinges (32) and three doors (33) from storage compartment (34). Drill out 24 rivets (31), if necessary. CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install three doors (33), six hinges (32) and 24 new rivets (31) to storage compartment (34, Figure 13-47), if removed. 2. Install three latches (30), six new rivets (29) and three knobs (28) on three doors (33), if removed. Figure 13-46. Figure 13-47. Go to Sheet 4 13-46

Privacy Statement
Press Release
Contact