REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
121

TM 5-3805-261-20 ENGINE MAINTENANCE. 6-9. Valve Cover Breather. (Sheet 2 of 3) REMOVAL 1. Remove bolt (1), two washers (2) and clip (3, Figure 6-20) from air compressor in front, left side of engine. 2. Loosen two clamps (5) from top, front of engine. NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends to prevent contamination. 3. Remove tube (4). 4. Remove two clamps (5) and hose (6) from breather (9). 5. Remove bolt (7) and washer (8, Figure 6-21). 6. Remove breather (9) from valve cover. 7. Remove and discard preformed packing (10) . Figure 6-21. Go to Sheet 3 Figure 6-20. 6-29

Privacy Statement
Press Release
Contact