TM 5-3805-261-20
ENGINE MAINTENANCE. (cont)
6-7.
Oil Filler and Cap. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install cap assembly (7) in pipe (8,
Figure 6-16).
2.
If removed, install washer (6) and new
rivet (5).
3.
Position items 8 thru 5 as an assembly
and new gasket (4, Figure 6-15) on
front, left side of engine cover.
4.
Install clip (3, Figure 6-14) on hose.
5.
Install two washers (2) and bolts (1).
6.
Close left side engine door.
NOTE
Return
130G
Grader
to
original
equipment condition.
Figure 6-16.
Figure 6-15.
Figure 6-14.
End of Task
6-24
