REMOVAL (cont) - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
125

TM 5-3805-261-20 ENGINE MAINTENANCE. 6-10. Turbocharger Oil Lines. (Sheet 3 of 4) REMOVAL 8. Remove two bolts (17) and elbow (18, Figure 6-25) from injection pump support. 9. Remove and discard preformed packing (19). 10. Remove tube assembly (14) and gasket (15) from elbow (18). Discard gasket (15) and remove all gasket material from mounting surfaces. 11. Remove and discard preformed packing (16). CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install new preformed packing (19) elbow (18) and two bolts (17, Figure 6- 25) in injection pump support. 2. Install new preformed packing (16) on tube assembly (14, Figure 6-24). Lubricate outer face with clean oil. 3. Install tube assembly (14) into elbow (18) under turbocharger. 4. Install new gasket (15) between flange of tube assembly (14) and under turbocharger. 5. Install two bolts (13). Figure 6-25. Go to Sheet 4 6-33

Privacy Statement
Press Release
Contact