REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
118

TM 5-3805-261-20 ENGINE MAINTENANCE. (cont) 6-8. Engine Oil Sampling Valve and Line. (Sheet 2 of 3) REMOVAL 1. Remove valve (1), preformed packing (2) and adapter (3) as an assembly unless inspection shows leakage. NOTE All hose and tube assemblies must be tagged before disconnecting to aid in installation. Cap all hose and tube ends and plug all open oil ports to prevent contamination. 2. Remove reducer (5), locknut (6) and connector (7) from hose assembly (8). NOTE Do not remove nut (4) unless inspection shows need for replacement. 3. Remove hose assembly (8), elbow (9) and bushing (10, Figure 6-19) from bottom, left side of engine. 4. Remove two bolts (11) and bracket (12) from top, left side of engine. Figure 6-18. Figure 6-17. Figure 6-19. Go to Sheet 3 6-26

Privacy Statement
Press Release
Contact