TM 5-3805-261-20
ENGINE MAINTENANCE.
6-8.
Engine Oil Sampling Valve and Line. (Sheet 3 of 3)
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
INSTALLATION
1.
Install bracket (12) and two bolts (11,
Figure 6-19) to top, left side of engine.
2.
Install bushing (10), elbow (9) and
hose assembly (8) to bottom, left side
of engine.
3.
Install
connector
(7),
locknut
(6),
reducer (5, Figure 6-18) to top, left
side of engine.
4.
Connect hose assembly (8) with nut
(4) to reducer (5).
5.
Install adapter (3), new preformed
packing (2) and valve (1, Figure 6-17).
If inspection showed no leaks install
items 1 thru 3 as an assembly.
NOTE
Return 130G Grader to original equipment
condition.
End of Task
6-27
